Star Wars: Anakin's Podracer 進度一

全盒超過一百件, 跳樓貨只賣$58, 兩支Jet engine蹤切分成四塊, 要黐返埋一碌有好多位都對唔準要修正, 仲有D夾口o係正detial中間, 將會好難搞下.

The jet engines is very details as it is the leading point of the whole
model. It has over a hundred piece of parts, both are very unusual for
an AMT kits.

Each engine 'tube' is divided into quarters, the pieces don't line up
precisely I had to cut the inside to make it fit. There are a lot seam
lines right between the details, it's going to be difficult.

[電單車]Kawasaki ZX-RR Ninja 完成

40個鐘冇訓呀. 我仲要影埋post埋先開始去訓
呢堆相同我o係出面派果D唔同. 黑背景

[電單車]Kawasaki ZX-RR Ninja 進度十八

死氣喉就咁噴透明色好似齋齋地. 醒起仲有盒Weathering Master. 捽左少少紅色落去
只欠碌同fairing就KO...

I tried to rub some burnt red with Tamiay weathering master. As photo

The body is completed, there are only fairings and wheel need to be
polished and wiring for the brakes need to be done. I'll take more
proper photo when it is 100% done. It looks like a cockroach without
wheels and fairing..

[電單車]Kawasaki ZX-RR Ninja 進度十七

買左兩盒Gundam Color...但係我冇買呢兩隻Murasai同0080 Z'gok...只係想買油先...廢事遲下搵唔返. .模型就到砌果時先買

諗住光油乾到咁上下, 拎條後叉來試下省水貼邊...另外油左少少釘位

I think the topcoat has been dried long enough(in fact I can't wait any
longer), I've sand down the decal's outline on the swing arms. I'll put
another semi-gloss coat on it so there is no need to polish further.
I'll let the fairings to dry for just two more days before I sand them.
I've also painted some detail for nuts and screws today.

[電單車]Kawasaki ZX-RR Ninja 進度十六

買左幾個焗tart用既兜, $10 四十八飛. 因為用開溝油果D杯, 點洗都係有塵, 下下用thinner洗條數好容...呢D用完掉, 永遠乾淨

死氣喉想照真車噴, 由藍轉橙, 加中間燒黑...變色過程只有一次冇重複


The mixing jugs that I used always have dust in it no matter how I
clean it, and the thinner that was consumed was much. I bought these
baking molds for about 1.5 USD 48 pcs, they are always clean, even I'll
have to throw one away for each color that was used, the cost for this
is still lower.

I wanted to simulate the exhaust pipes according to the real thing, the burnt color went like blue to orange with smoke through out. The sequence of the change in colors only occured once.

[電單車]Kawasaki ZX-RR Ninja 進度十五

手制中間用Alclad Chrome, 用膠紙同線mask...之後噴黑
I used Alclad II chrome on these pieces and masked them with tape and cotton knit, than sprayed a black coat on top.

前brake碟大概搞掂
Some masking are done, and front brake disk is done...almost

就來二月

橫掂對眼著唔到燈. 又唔諗住再拆開佢搞,將對瞎眼噴返實色青光眼先