The paint on the fairing still feels soft, I can't apply decal yet. I
guess it would take days to get harden, I will be working on the
interior these days.
Tuesday, January 13, 2009
[電單車]Kawasaki ZX-RR Ninja 進度十
Fairing油漆未乾. 仲諗住可以上埋水貼噴埋光油等佢乾慢慢先搞內籠...睇黎要整好晒內籠先可以上水貼
The paint on the fairing still feels soft, I can't apply decal yet. I
guess it would take days to get harden, I will be working on the
interior these days.
The paint on the fairing still feels soft, I can't apply decal yet. I
guess it would take days to get harden, I will be working on the
interior these days.
Monday, January 12, 2009
[電單車]Kawasaki ZX-RR Ninja 進度九
整左成晚, 之前隻綠色唔靚. 我洗晒再噴. 整左少少碳纖維, 個網係係通寶行買既筆袋剪落黎, 密度o岩o岩好又軟. 將件part貼落舊藍寶貼度再黐個網上去, 之後噴SM03 Super Iron+smoke. 隻綠色用水性X-15加幾滴瑩光綠, 勁慢乾, 成日有塵黐落去又要等成年等佢乾左先可以磨, 最後決定有D位第時會用水貼摭住既就由佢, 其他見光位就噴GX白摭過左佢算數..
I've worked overnight it is 7:35 AM here. Last night I did some CF
effects, I cut this mesh from a stationery beg, it is very flexable, I
put the part against a blue tape and the mesh over them, then sprayed on SM03 Iron+smoke.
The rest of the night was spent on painting the fairings. The green is
much better now, I used Acrylic paint X-15 with a few drops of
Fluorescent green, because it is acrylic paint it took a lot longer to
dry.
Often there were dust landed on the surface I have had to wait for the
paint to dry then sand away the dust, that explain why it took the
whole night.
The layer was still not thick enough after a few hours of spraying,
waiting and sanding, later I decided not to sand every dust away and
paint an even layer of paint everywhere, those spots later will be
cover by decal were left alone(dusty or unpainted), the rest of the
dusty parts were painted with GX01 white to cover them before continue
painting green on.
I've worked overnight it is 7:35 AM here. Last night I did some CF
effects, I cut this mesh from a stationery beg, it is very flexable, I
put the part against a blue tape and the mesh over them, then sprayed on SM03 Iron+smoke.
The rest of the night was spent on painting the fairings. The green is
much better now, I used Acrylic paint X-15 with a few drops of
Fluorescent green, because it is acrylic paint it took a lot longer to
dry.
Often there were dust landed on the surface I have had to wait for the
paint to dry then sand away the dust, that explain why it took the
whole night.
The layer was still not thick enough after a few hours of spraying,
waiting and sanding, later I decided not to sand every dust away and
paint an even layer of paint everywhere, those spots later will be
cover by decal were left alone(dusty or unpainted), the rest of the
dusty parts were painted with GX01 white to cover them before continue
painting green on.
Friday, January 9, 2009
[電單車]Kawasaki ZX-RR Ninja 進度八
噴左主色, 好似深左..比起原件色同張水貼...
I used Mr. Color SM01 Silver for parts that need to be painted with
Aluminium color. The green might looks ok from the photo(under bright
light), it looks like it is matching with the decal, but when I turn
off the table lamp, the actual color is duller and deeper, I'm not sure if my eyes are playing tricks, after all it is 4 AM at morning here now.
I used Mr. Color SM01 Silver for parts that need to be painted with
Aluminium color. The green might looks ok from the photo(under bright
light), it looks like it is matching with the decal, but when I turn
off the table lamp, the actual color is duller and deeper, I'm not sure if my eyes are playing tricks, after all it is 4 AM at morning here now.
Thursday, January 8, 2009
[電單車]Kawasaki ZX-RR Ninja 進度七
全部打黑底, 唔知點解唔夠滑, 捽捽先上銀
Painted everything black, except outside of fairings, somehow the
finish is not as smooth and clean as my previous works. Will be rubbed
with polishing compound before spraying on metallic color or flat/semi-gloss clear coat as instructed
Painted everything black, except outside of fairings, somehow the
finish is not as smooth and clean as my previous works. Will be rubbed
with polishing compound before spraying on metallic color or flat/semi-gloss clear coat as instructed
Monday, January 5, 2009
Saturday, January 3, 2009
[電單車]Kawasaki ZX-RR Ninja 進度六
全部上灰, 磨返滑, 第日再灰多次, 之後Fairings上白底, 其他上晒光黑先
Primed, I've sand it with #1200 grain paper, have to prime again
another day, then the fairing will be based with Mr. GX cool white and
the rest will be based super gloss black.
Primed, I've sand it with #1200 grain paper, have to prime again
another day, then the fairing will be based with Mr. GX cool white and
the rest will be based super gloss black.
Thursday, January 1, 2009
[電單車]Kawasaki ZX-RR Ninja 進度五
今日搞食蝦片, 都係用介刀切, 用銼收邊, 之後用A+B epoxy膠來黐, 因為較杰又就慢乾, 聽日上灰喇掛
done with some photo-etch parts. I used A+B epoxy to glue them because
it dries slowly. I would probably start to prime tomorrow.
done with some photo-etch parts. I used A+B epoxy to glue them because
it dries slowly. I would probably start to prime tomorrow.
Subscribe to:
Posts (Atom)