Sunday, May 29, 2011

水隔修理成功

正話試下個水隔整唔整到, 先發覺原來個1分頭外徑係o岩, 但係內徑好細, 插唔入條喉, 就咁鑽闊佢。鑽頭幾次都仲有漏氣, 用番皂水check邊度漏, 最後得左, 依家去到50psi會自動cut. 落到40psi就著返...不過我較去20psi一直噴時, 個泵隔兩秒停, 停幾秒又著兩秒, 唔知會唔會反而對個泵唔好? 舊AB膠就氣壓最高時都仲頂得住
左邊銅色係鑽闊左, 右邊係一直用開既sparmax

at

1 comment:

  1. 地理堂May 30, 2011 at 6:31 PM

    這樣應該幾傷個泵架喎 
    [版主回覆05/30/2011 14:19:00]唔通仲要加個大tank...其他人D auto cut係咪咁架. 以前成日都著住幾個鐘. overheat之後斷電著唔返..

    ReplyDelete